View source for Consumption of R-PI

*[http://raspberrypi.stackexchange.com/questions/8498/disable-lan9512 How to add usb webcam and WiFi to RPi model A without ruinning power consumption?]
*[http://elinux.org/RPi_Hardware RPi_Hardware ]
*[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=33159 Reducing power consumption]
 However, if you buy a model A it only uses 0.5 Watts at idle instead of 2 Watts. 
 That's a big step in the right direction. 
 I was also under the impression that the HDMI doesn't use any power unless something is connected?


 It seems the most power reduction (below 200 mA) on R-Pi Model B can be achieved by desoldering the Ethernet chip (IC3 - LAN9512)
 as done on frenetic rapport. 
 I think we can still have the Ethernet port via the lower USB port using USB to Ethernet adapter. 
 But I am not sure yet if I would take that option


*[http://www.bitwizard.nl/wiki/index.php?title=Reducing_power_consumption_of_a_raspberry_Pi Reducing power consumption of a raspberry Pi]
 Replace the linear regulator....with a switching
'''3 pin 78xx replacements:''' 


==Recom==
*[http://www.recom-international.com/ recom]
*[http://www.digikey.ie/suppliers/ie/recom-power.page?lang=en&WT.srch=1&WT.medium=cpc&WT.mc_id=IQ61705061-VQ2-g-VQ6-29433557838-VQ15-1t1-VQ16-c recom in digikey]
*[http://www.digikey.ie/PTM/PTMPartList.page?site=ie&lang=en&ptm=25597 recom 78xx replacements in digikey]



==Cui==
*[http://www.cui.com/dc-switching-regulators cui]
*[http://www.digikey.com/product-highlights/us/en/cui-v78-regulators/1177 cui digikey]
*[http://www.digikey.com/product-detail/en/P7805-Q24-S3-S/102-2704-ND/4009631 Cuy 500ma 3pin regulators in Digikey]
*[http://www.digikey.com/product-detail/en/P7805-Q24-S3-S/102-2704-ND/4009631 A 3.3V 3pin regulator at Digikey]



{{Cat1|Buoy|Linux embedded|Raspberry pi}}