Mostly printed CNC

Parts

1 – Ramps 1.4 (Arduino mega, 3 drv8825 drivers , shield), flashed with firmware
1 – power supply 12v 5A with US plug (Enough for the MK style extruder, but not enough for a heated bed, upgrade options coming soon) new more efficient one than the one pictured.
5 – Nema 17 – 76OZ/in
4 – GT2 16 tooth Pulleys, 2 set screws
53 – 608 style bearings ----> 608zz
1 – 5/16 all thread 12″, with white lithium ---> Metric: M8 x 305mm
1 – spring -For a basic anti backlash
1 – 5/16 nut ----> Metric: M8
1 – 5/16 x .75″ coupler nut ----> Metric: M8 X 20 (19.05)
4 – BOLTS 5/16 x 3 ----> Metric: M8 X 80 (76.62)
8 – BOLTS 5/16 x 2.5 --> Metric: M8 X 65 (63.5)
2 – BOLTS 5/16 x 1.75 -> Metric: M8 X 45 (44.45)
2 – BOLTS 5/16 x 1.5 --> Metric: M8 X 40 (38.1)
28 – BOLTS 5/16 x 1.25 -> Metric: M8 X 35 (31.75)

8 – 5/16 fender washers
8 – 5/16 speed washers, skateboard kind
44 – lock nuts 5/16
34 – SCREW 6/32 x .75 ----> Metric: M5 X 20 (4.762 x 19.05)
2 – SCREW 6/32 x .5 for Rigid coupler, Use real coupler eventually ----> Metric: M5 X 15 (4.762 x 12.7)
36 – LOCK NUTs 6/32 ----> Metric: M5
20 – M3x10 for Nema’s
13ft – GT2 Belt enough for 24”x24”
15ft – stranded 4/22 wire for steppers
3 – stepper dupont plugs
1 – thermistor dupont plug (for resistor)
1- resistor to act a thermistor if not using a extruder
20 – zipties